- Coil Thickness: Up To 20MM
- Coil Width : 2000-2500MM
- Coil Material: HR Coil
About coil cut to length machine
Coil cut to length machine is an automated production equipment designed for metal sheet processing. It is mainly used to cut large coils of metal materials (such as steel coils, aluminum coils, stainless steel coils, etc.) into plates of fixed length. Cut to length lines are widely used in many industries such as automobile manufacturing, home appliance production, building materials, aerospace, etc. Its high efficiency and precision provide important support for modern industrial production.
Indonesian Customer Inquiry
At present, the most common coil cut to length machine on the market is used to process thin metal materials. A customer from Indonesia found KINGREAL SLITTING through the official website and put forward his needs.
The Indonesian customer needs to process metal materials with a thickness of at least 15mm. Before that, he had asked many manufacturers and the answer he got was that it was impossible.
KINGREAL SLITTING staff recorded the Indonesian customer's needs one by one and fed back to KINGREAL SLITTING engineers. The engineer quickly responded that it is not difficult to enable the coil cut to length machine to process thick metal coils, but the selection of raw materials and manufacturing steps during machine manufacturing will be more demanding.
In addition, thick plate processing has stringent requirements on shear force, speed, precision, etc., and requires multiple adjustments to achieve the optimal state.
After the KINGREAL SLITTING engineer communicated with the Indonesian customer, the customer and KINGREAL SLITTING reached a preliminary cooperation intention.
Customized cut to length line solutions
Then, KINGREAL SLITTING staff organized a meeting and invited engineers and Indonesian customers to participate. The main purpose of the meeting was to confirm with the customer the final requirements for the cut to length line and the specific machine parameters. KINGREAL SLITTING engineers checked the details with the Indonesian customer one by one, confirming the shearing speed required by the customer, whether there are strict requirements for leveling, whether there are special requirements for blade materials, etc.
It was learned that the Indonesian customer's metal processing raw materials are single hot-rolled coils, combined with the customer's most important demand-the need to process thick metal materials. KINGREAL SLITTING engineers developed the final plan forcut to length line manufacturing for Indonesian customers. The Indonesian customer was very satisfied with the customized coil cut to length machine manufacturing plan developed by KINGREAL SLITTING engineers for him.
Cut to length lines on the market can usually only process metal coils with a thickness of 0.3-3mm. However, KINGREAL SLITTING, with its excellent design capabilities and based on the actual production needs of customers, can create a coil cut to length machine that supports the processing of metal coils with a thickness of up to 20mm!
About KINGREAL SLITTING
KINGREAL SLITTING is a coil slitting line and cut to length line manufacturer with more than 20 years of rich experience. KINGREAL SLITTING has been committed to bringing customers high-quality coil slitting machines and coil cut to length machines, and puts customers' production needs first, and also can make customized machine solutions for customers!
