-Coil Thickness:0.3-3MM
-Coil Weight: 1650MM
- Min Slit Weigh : 25MM
- Slitting Speed: 200M/Min
KINGREAL SLITTING received a favorable comment from a Saudi Arabian customer. He gave a very high evaluation of KINGREAL SLITTING's sheet metal slitting machine, especially the maximum slitting speed of 200m/min and the ability to fully automatically load materials. This case will review the entire process between this KINGREAL SLITTING and the Saudi Arabian customer.
Visit KINGREAL SLITTING Factory
This Saudi Arabian customer found KINGREAL SLITTING through a friend's introduction. His friend had purchased three sheet metal slitter from KINGREAL SLITTING.
After communicating with KINGREAL SLITTING staff through the Internet and having a basic understanding of KINGREAL SLITTING's sheet metal slitting machine, the customer proposed to visit the KINGREAL SLITTING factory to investigate whether the KINGREAL SLITTING sheet metal slitter can produce products that meet the production needs of Saudi Arabian customers.
At the KINGREAL SLITTING factory, Saudi Arabian customers watched the operation of the KINGREAL SLITTING slitting machine up close, and the staff also measured the precision of the slitting products. Saudi Arabian customers praised the slitting products of the KINGREAL SLITTING slitting machine for being burr-free and high-precision.
Plan Discussion and Confirmation
After the visit, KINGREAL SLITTING engineers further discussed the sheet metal slitter with customers in the conference room and dug deep into the customer's production needs. The customer emphasized the need for a high-speed and automated sheet metal slitter. KINGREAL SLITTING engineers proposed that according to the customer's needs, the KINGREAL SLITTING sheet metal slitting machine can be designed with features such as a speed of 200m/min and fully automatic feeding, and submitted a perfect slitting solution to the customer. The customer expressed satisfaction and reached a cooperation with KINGREAL SLITTING.
Machinery Manufacturing
During the sheet metal slitting machine manufacturing stage, KINGREAL SLITTING staff will send pictures and videos of machine manufacturing to Saudi Arabian customers, and provide real-time feedback from customers on the latest progress of machine manufacturing.
Machine test
After the KINGREAL SLITTING sheet metal slitter was manufactured, it was strictly tested in the KINGREAL SLITTING factory. The machine parameters were repeatedly confirmed to determine that the sheet metal slitting machine meets the following customer needs:
① High-speed slitting reaches 200m/min
② Can slitting metal raw materials with a thickness of 0.3-3mm
③ Can fully automatically load
④ Can support a maximum metal raw material width of 1650mm
Then the KINGREAL SLITTING sheet metal slitting machine was sent to the customer's factory.
Offline installation
KINGREAL SLITTING sent professional engineers to the customer's factory in Saudi Arabia to install the sheet metal slitting machine for the customer. KINGREAL SLITTING engineers first opened the machine packaging bag and carefully checked the components. After confirming that the components are in good condition, the slitting machine was installed.
After installing the machine, KINGREAL SLITTING engineers provided technical guidance to the Saudi Arabian workers, teaching them how to use the sheet metal slitter correctly, and stated that the sheet metal slitter is automatic loading, and only needs to be operated manually on the control panel, and the machine can automatically load. In order to make it easier for the workers to understand, KINGREAL SLITTING engineers also actually operated the machine. After ensuring that the workers can use the sheet metal slitting machine correctly, the trip to Russia ended.
